Repair order 2 - Aisan Cougar

A $300 job requires replacing three filters. First, use your computer and buy an oil filter ($50), a fuel filter ($80), and an air filter ($35). So it's easy to calculate that we will earn 135 "greenbacks" cleanly. After you have purchased the necessary parts, open the hood of your car. In the center of the engine, slightly to the right, next to the yellow dipstick for checking the oil level, you will find a round oil cap. In disassembly mode, tap on it to unscrew it, and then on the oil filter inside. Enter the installation mode, click on the hole created in this way and select the new oil filter purchased in the store. Tighten the oil filter cap again and return to disassembly mode.

On the right side you will find a distinctive black lid, which is accessed by a curved pipe. Between the tube and the lid you will find a small sleeve, this is a flow meter. First, remove the aforementioned air intake tube, and then the flow meter (four-bolt mounting). Only now can you reach the air filter cover. There is an air filter under it. Remove the used filter and enter the build mode. After installing the new part, install all the parts in reverse order: the lid, the flow meter, and the suction tube. It's time to replace the fuel filter. To do this, you need to lift the car. So go to the elevator panel and press LMB. When the car gets up, approach it from behind and click the chassis icon. First, you need to find the fuel tank. This is a rectangular tank located in the center at the height of the rear axle of the car.

How to make a car chip tuning?

This option is only available in the third workshop. Go through the appropriate door to the dynamometer and use the program "Program EEPROM". Click on the pros and cons on the three lanes so that their level is the same. If you have succeeded, but the power gain is too small, tap once on the positive dots on each strip until you are satisfied with the setting level. An inscription at the top of the window will inform you about the appropriate mixture of fuel and air. After successful setup, use the "OBD Link Pro" program for approval and click the "Start Test" button in the application window.

Position the camera so that you can see the top of the tank, then look at it from the front of the car. There you should find a fuel filter, it's a cylindrical object with short wires sticking out from both sides. You no longer need to gamble real money to win big — thanks to sweepstakes platforms, you can enjoy a full casino experience without depositing a dime.